Networking & Communication PCI ADSL Modem ADP-8301 User’s Manual
Copyright Copyright (C) 2002 PLANET Technology Corp. All rights reserved. The products and programs described in this User’s Manual are licensed products of PLANET Technology, This User’s Manual contains proprietary information protected by copyright, and this User’s Manual and all accompanying hardware, software, and documentation are copyrighted.
Trademarks The PLANET logo is a trademark of PLANET Technology. This documentation may refer to numerous hardware and software products by their trade names. In most, if not all cases, these designations are claimed as trademarks or registered trademarks by their respective companies. Revision User’s Manual for PLANET PCI ADSL Modem: Model: ADP-8301 Rev: 1.0 (Oct. 2002) Part No. EM-ADP8301V1.
TABLE OF CONTENTS CHAPTER 1 INTRODUCTION .................................................................................1 FEATURES...............................................................................................................1 SYSTEM REQUIREMENT ...........................................................................................1 DATA REQUIREMENT ................................................................................................1 CHAPTER 2 INSTALLATION .................
Chapter 1 Introduction 1 PLANET PCI ADSL modem ADP-8301 is designed to provide cost-effective access to high-speed ADSL services. With our ADSL modem, surfing on Internet is just like driving a sport car on the Express Highway. Video on Demand, Videoconference and any high-speed internet applications is not a dream any more. But a reality! Features l Compliant with ANSI T1.413 Issue 2, ITUG.dmt (G.992.1) and splitterless ITU G.lite (G.992.2) ADSL standard.
l Encapsulation mode (example: RFC 1483, 1577...etc.) l IP Address, Subnet mask l Gateway value l DNS For ADSL WAN (PPPoE/PPPoA) mode user l VPI/VCI value l Encapsulation mode (example: RFC 2364,2516...etc.
Chapter 2 Installation 2 Hardware Installation 1. Make sure that your computer is switched off. Unplug the power cord from the wall socket. Also turn off all other peripherals you may have attached to your computer. Remove your computer cover 2. Select a free PCI slot. Remove the cover from the slot. Keep the screw. You will be using it in the next step. 3. Carefully slide the ADSL modem into the chosen slot. Press firmly on the top of the modem to seat it.
2. Choose the “Automatic search for a better driver (Recommended)” and click Next.
3. Choose CD-ROM drive and Specify a location. Then click Next. 4. Click Next.
5. Click Finish to complete the installation. Driver Installation for both LAN and WAN mode with Win ME 1. The “Add New Hardware Wizard” will be displayed and choose Automatic search for a better driver (Recommended).Click Next.
2. Please specify the path which ADSL modem connected your computer to Internet, then click OK. 3. Windows is installing drivers for your new hardware. Click Finish. Driver Installation for both LAN and WAN mode with Win 2000 1. The “Add New Hardware Wizard” will be displayed and click Next.
2. Choose the “Search for a suitable driver for my device (recommended)”, and click Next. 3. Select the “CD-ROM drives”, then click Next. (Make sure you have inserted the driver CD into the CDROM drive.
4. Windows will find a driver for this device. Then click Next. 5. Windows is installing drivers for your new hardware.
6. The “Digital Signature Not Found” will be displayed, Click Yes.
7. Click Finish to complete ADP-8301 installation. Driver Installation for both LAN and WAN mode with Win XP 1. The “Add New Hardware Wizard” will be displayed. Choose Install from a list or specific location (Advanced) and click Next.
2. Choose “Search for the best driver in these locations”, and “Search removable media (floppy, CD_ROM…)”, then click Next 3.”Conexant AccessRunner PCI Arbitration Device” will be displayed and click Next. 4. under “Software Installation” window. Click “Continue Anyway”.
5. Under “Hardware Installation” window. Click “Continue Anyway”.
6. Click “Finish” to complete the “Found New Hardware Wizard” of ADP-8301. Driver Installation for both LAN and WAN mode under Win NT 1. Search and open for the properly driver files, e.g. D:\ Conexant\ Winnt4\ chooses LAN or WAN and run SETUP.
2. If this massage appears, please install REMOTE ACCESS SERVICES (RAS). 3. Click OK to complete the installation. 4. Click the Conexant Access Runner ADSL icon, it will be displayed the status of the modem.
16
Chapter 3 ADSL Configuration 3 ADSL LAN Configuration 1. Conexant Access Runner ADSL icon should be added in the control panel or on the desktop. 2. Click the Conexant Access Runner ADSL icon, it will be displayed the status of the modem.
3. Press Alt + P on the keyboard, the right figure appears. 4. Under the Protocol Setup please set the value of VCI, VPI and Encapsulation. 5. Click My Computer on the desktop\ Control Panel\ Network\ Configuration -> select TCP/IP -> click properties to setup TCP/IP related parameters.
6. IP Address setting: select Specify an address, then enter the value of IP Address and Subnet Mask which released from your ISP. 7. Gateway setting: enter the data from your ISP and click Add.
8. DNS Configuration setting: Select Enable DNS, enter Host name and add DNS Server Search Order. Click Add and OK. 9. Reboot computer to activate the modifications if necessary. NOTE: TCP/IP configuration listed above is a sample for ADP-8301 installation on Windows 98 machine. It is strongly recommended to refer user’s manual or consult network administrator to ensure correctness of TCP/IP configuration.
2. Click the Conexant Access Runner ADSL icon, modem status played. be dis- 3. Press Alt + P on the keyboard, the right figure appears. 4. Under the Protocol Setup please set the value of VCI, VPI and Encapsulation, then click OK.
5. Click the Access Runner DSL icon on the desktop -> enter User name, Password and Phone number (don’t care; recommend “0000”) from your ISP. 6. Click Connect. Now, you can surfer the Internet.
NOTE: TCP/IP configuration listed above is a sample for ADP-8301 installation on Windows 2000 machine. It is strongly recommended to refer user’s manual of operation system or consult network administrator to ensure correctness of TCP/IP configuration. Meanwhile, parameters of TCP/IP configuration shall be depended on your ISP; please consult with your service provider about the configuration.
