WNAP-1120 802.11n Wireless Access Point Quick Installation Guide

Installing the Access Point

Power Socket LAN Port

SMA Connectors

Connect bundled antenna to the two SMA connectors.

Connect the LAN PC or network devices to WNAP-1120 LAN port with

RJ-45 Ethernet cables.

Connect power adapter to the power socket on WNAP-1120, and plug

the other end of the power pack into an electrical outlet.

After hardware connection is done, please refer to below for the

conguration.

Note

ONLY use the power adapter supplied with WNAP-1120.

Otherwise, the product may be damaged.