User's Manual

User Manual of WAP-500N/WBS-500N
-64-
The page includes the following settings:
Object Description
Management VLAN ID
If your network includes VLANs and if tagged packets need to pass
through the Access Point, enter the VLAN ID. Otherwise, select No VLAN
tag.
Accept
Click Accept to apply the changes.
Cancel
Click Cancel to cancel the settings.
4.6.3 SNMP Settings
SNMP is used in network management systems to monitor network-attached devices for conditions that warrant
administrative attention.
Click “Management
SNMP Settings” to configure SNMP settings.
Figure 4-42 SNMP Settings