User's Manual

4.5.5
Wireless Advanced Settings
Click “Wireless

Wireless Advanced Settings
This section allows you to configure
the
Figure
The page includes
the following settings
Object
Description
• Data Rate
Select a data rate from the drop
throughput. If you select a low data rate
throughput is reduced but the
def
• Transmit Power
The t
To meet the regional regulation, this option is not allowed to be configured
through the user interface.
• RTS/CTS Threshold
When the length of a data packet exceeds this
an RTS frame to the destination wireless node, and the latter will reply
with a CTS frame, and thus they are ready to communicate. The default
value is 234
User Manual of
WAP
-61-
Wireless Advanced Settings
Wireless Advanced Settings
”
to configure the wireless advanced settings.
the
wireless related settings
to optimize the wireless network.
Figure
4-39 Wireless Advanced Settings
the following settings
:
Description
Select a data rate from the drop
-
down list. The
throughput. If you select a low data rate
value, for example, the
throughput is reduced but the
transmission distance increases.
def
ault is “Auto”.
The t
ransmission power of the device (value: auto).
To meet the regional regulation, this option is not allowed to be configured
through the user interface.
When the length of a data packet exceeds this
value, the
an RTS frame to the destination wireless node, and the latter will reply
with a CTS frame, and thus they are ready to communicate. The default
value is 234
6.
A small number causes RTS/CTS packets to be sent more
WAP
-500N/WBS-500N
to configure the wireless advanced settings.
to optimize the wireless network.
down list. The
data rate affects
value, for example, the
transmission distance increases.
The
ransmission power of the device (value: auto).
To meet the regional regulation, this option is not allowed to be configured
value, the
device will send
an RTS frame to the destination wireless node, and the latter will reply
with a CTS frame, and thus they are ready to communicate. The default
A small number causes RTS/CTS packets to be sent more