User's Manual

Figure 4-29
Security Settings
In the WDS Bridge mode, select
Security Mode
security
settings. The security settings in each site of the WDS link must be configured to the same.
Figure
The option includes the following settings
Object
Description
• Security Mode
Select the suitable security mode from the drop
wireless network.
WPA2
WPA2
1.
The WEP and WPA/WPA2 with TKIP d
are not
available in
2. In the
802.11a/n mixed
the connection mode/speed will be changed from 802.11n to 802.11a.
User Manual of
WAP
-51-
Security Settings
–
CB/WDS STA/CR/Repeater Mode
Security Mode
on the “WDS Link Settings” page
to
settings. The security settings in each site of the WDS link must be configured to the same.
Figure
4-30 Security Settings – WDS Bridge Mode
The option includes the following settings
:
Description
Select the suitable security mode from the drop
-
wireless network.
The options include
Disabled, WEP, WPA
WPA2
-PSK, WPA-
PSK Mixed, WPA, WPA2, and WPA Mixed
WPA2
-PSK mode is strongly recommended.
The WEP and WPA/WPA2 with TKIP d
oes not support in the
802.11n mode and these options
available in
the 802.11n mode.
802.11a/n mixed
mode, if the security is configured to WEP
the connection mode/speed will be changed from 802.11n to 802.11a.
WAP
-500N/WBS-500N
CB/WDS STA/CR/Repeater Mode
to
configure the wireless
settings. The security settings in each site of the WDS link must be configured to the same.
-
down list to encrypt the
Disabled, WEP, WPA
-PSK,
PSK Mixed, WPA, WPA2, and WPA Mixed
. The latest
802.11n mode and these options
and
WPA/WPA2 with TKIP,
the connection mode/speed will be changed from 802.11n to 802.11a.