User's Manual

NOTE:
1.
The WDS link settings is only available in
wireless MAC address each other by using non
with other brand
s or
2.
The security setting in each site of
3.
The wireless channel must be fixed and must be the same in each site of WDS link.
4.5.3 Security Settings
Go to the “Wireless

Wireless Network
In the AP/WDS AP mode, click the
Edit
and configure the wireless security for the wireless network.
Figure
In the CB/WDS STA/CR/Repeater
mode,
the wireless security similar to the
root AP’s security settings
User Manual of
WAP
-50-
The WDS link settings is only available in
WDS Bridge mode and
is communicating through
wireless MAC address each other by using non
-
standard protocol which may not
s or
models
. Use the same model for full compatibility
The security setting in each site of
WDS link must be the same.
The wireless channel must be fixed and must be the same in each site of WDS link.
Wireless Network
” page to configure the security settings.
Edit
button on the “Wireless Network”
page to enter the
and configure the wireless security for the wireless network.
Figure
4-28 Security Settings – AP/WDS AP Mode
mode,
select Security Mode on the “
Wireless Network
root AP’s security settings
.
WAP
-500N/WBS-500N
is communicating through
standard protocol which may not
be
compatible
. Use the same model for full compatibility
as required.
The wireless channel must be fixed and must be the same in each site of WDS link.
page to enter the
“SSID Profile” page
Wireless Network
” page to configure