User's Manual

4.5.2 WDS Link Settings
Go to the “Operation Mode”
page to configure the device as
Link Settings”
to configure the WDS link settings
Figure
4
The page includes the following settings
Object
Description
• Security
Select the type of WDS
• WEP Key
Enter the WEP key if security
• AES Passphrase
Enter the AES
• MAC Address
Enter the
wireless
• Mode
Select Disable or Enable to
• Accept
Click
• Cancel
Click
settings
User Manual of
WAP
-49-
page to configure the device as
“WDS Bridge” and the
n
to configure the WDS link settings
.
4
-27 WDS Link Settings – WDS Bridge Mode
The page includes the following settings
:
Description
Select the type of WDS
security: None, WEP, or AES.
Enter the WEP key if security
is selected
as WEP.
Enter the AES
passphrase if security is selected
as
Enter the
wireless MAC address of the AP
to which you want to
wireless
connectivity.
Select Disable or Enable to
disable or enable WDS.
Click
Accept to save the settings.
Click
Cancel to
cancel the unsaved changes and revert to the previous
settings
.
WAP
-500N/WBS-500N
n
go to “Wireless

WDS
security: None, WEP, or AES.
as WEP.
as
AES.
to which you want to
extend
disable or enable WDS.
cancel the unsaved changes and revert to the previous