User's Manual

Figure
The page includes the
following settings
Object
Description
• Wireless Mode
Wireless mode supports
• Channel HT Mode
The default channel bandwidth
better
• Extension Channel
Select
function.
• Channel / Frequency
Select the channel and
• Auto
Check this option to enable auto
• AP Detection
AP
areas for Access Points.
• Current Profile
Configure up to four different SSIDs. If many client devices will be
accessing the network, you can arrange the
Click Edit
extra SSIDs.
SSID Profile
• SSID
Specify the SSID for the current profile.
• VLAN ID
Specify the VLAN tag for the current profile.
• Suppressed SSID
Check this option to hide the SSID from
not appear in the site survey.
• Station Separation
Click the appropriate radio button to allow
between client devices.
• Wireless Security
Refer to section
• Save
Click
User Manual of
WAP
-47-
Figure
4-25 Wireless Network – SSID Profile
following settings
:
Description
Wireless mode supports
802.11a/n
mixed modes.
The default channel bandwidth
is 20/40MHz. The larger the channel, the
better
the transmission quality and speed.
Select
upper or lower channel. Your selection may affect the Auto
function.
Select the channel and
frequency that apply to
your country’s
Check this option to enable auto
-
channel selection.
AP
Detection can select the best channel to use by scanning nearby
areas for Access Points.
Configure up to four different SSIDs. If many client devices will be
accessing the network, you can arrange the
devices into SSID groups.
Click Edit
to configure the profile and check whether you want to enable
extra SSIDs.
Specify the SSID for the current profile.
Specify the VLAN tag for the current profile.
Check this option to hide the SSID from
clients. If checked, the SSID will
not appear in the site survey.
Click the appropriate radio button to allow
or prevent communication
between client devices.
Refer to section
5.5.3 Security Setting.
Click
Save to save changes.
WAP
-500N/WBS-500N
mixed modes.
is 20/40MHz. The larger the channel, the
upper or lower channel. Your selection may affect the Auto
channel
your country’s
regulations.
channel selection.
Detection can select the best channel to use by scanning nearby
Configure up to four different SSIDs. If many client devices will be
devices into SSID groups.
to configure the profile and check whether you want to enable
clients. If checked, the SSID will
or prevent communication