User's Manual

The page includes the following settings
Object
Description
• IP Address
The
• IP Subnet Mask
The
• Use Router As DHCP
Server
Select
• Starting IP Address
Specify the starting IP address for
• Ending IP Address
Specify the
• WINS Server IP
Enter the IP address of the WINS server.
• Accept
Click
• Cancel
Click
4.4.2 WAN Settings
Go to the “Operation Mode”
page to configure the device as
to configure the device’s WAN settings.
User Manual of
WAP
-35-
The page includes the following settings
:
Description
The
LAN IP of the AP.
The
LAN subnet mask of the AP.
Select
it to enable DHCP server.
In here the device is acting as a router.
Specify the starting IP address for
the
DHCP range.
Specify the
ending IP address for the
DHCP range.
Enter the IP address of the WINS server.
Click
Accept to apply the setting.
Click
Cancel to cancel the setting.
page to configure the device as
“WISP” and then go to “
Router
to configure the device’s WAN settings.
The WAN settings should be provided by
the ISP
Figure 4-15 WAN Settings – All
WAP
-500N/WBS-500N
In here the device is acting as a router.
DHCP range.
DHCP range.
Router

WAN Settings”
the ISP
.