User's Manual

The page includes the
following settings
Object
Description
• System Information
S
address, country, current time,
• LAN Settings
S
mask,
• WAN Settings
S
type, connection status,
DNS
• Current Wireless Settings
S
channel bandwidth,
security settings
4.2.2 Save/Reload
Click “Status

Save/Reload” a
nd the following page
Click Save & Apply
to save and apply all configurations.
Click Revert
to cancel the unsaved changes and revert to the previous settings that have been saved.
It's
not necessary to save and apply the settings if unsaved changes list is empty.
User Manual of
WAP
-27-
following settings
:
Description
S
hows the general system information such as
device name, MAC
address, country, current time,
and
firmware version.
S
hows Local Area Network settings such as the
LAN IP address, subnet
mask,
DHCP server, and Rx/Tx packets.
S
hows Wide Area Network settings such as the
MAC address, connecti
type, connection status,
IP
address, subnet mask, primary and secondary
DNS
, and Rx/Tx packets.
S
hows wireless information such as
operation mode, wireless mode,
channel bandwidth,
frequency, channel,
information about each SSID,
security settings
, and Rx/Tx packets.
nd the following page
will be displayed.
Figure 4-4 Save/Reload
to save and apply all configurations.
to cancel the unsaved changes and revert to the previous settings that have been saved.
not necessary to save and apply the settings if unsaved changes list is empty.
WAP
-500N/WBS-500N
device name, MAC
firmware version.
LAN IP address, subnet
MAC address, connecti
on
address, subnet mask, primary and secondary
operation mode, wireless mode,
information about each SSID,
to cancel the unsaved changes and revert to the previous settings that have been saved.