User's Manual

To increase the time more rapidly, press
and hold the Raise pushbutton. The
maximum preset alarm time is 9 minutes
and 59 seconds, once this value has
been exceeded the alarm timer will wrap
around to 0 minutes and 0 seconds.
To decrease the preset alarm time,
repeatedly press and release the
Lower pushbutton. Each time that the
pushbutton is pressed, the alarm time will
decrease by 10 seconds. To decrease
the time more rapidly, press and hold the
Lower pushbutton. The minimum preset
alarm time is 0 minutes and 0 seconds,
once this value has been exceeded the
alarm timer will wrap around to 9 minutes
and 59 seconds.
Once you have set the alarm time to the
preset time that you require, press the
Select pushbutton to save the value. The
time will briey ash, indicating that the
time has been accepted.
SETTING THE START METHOD
OF THE GAME TIMER
Once the START option has been se-
lected from the GAME TIMER Menu, the
preset method of starting the game timer
will be displayed on the right hand side of
the screen, the factory setting for which
is BUTTON.
To change the starting option for the
Game Timer, simply use the Raise or
Lower pushbuttons to scroll through the
menu choices.
continued ...
BUTTON means that pressing the Lower
pushbutton will start the game timer
(when displayed). TRIGGER means that
pulling the trigger will start the game
timer (when displayed). CANCEL returns
to the GAME TIMER Menu.
STARTING THE GAME TIMER
When TIMER has been selected as the
designated Display screen, the game
timer will be displayed.
Starting the game timer depends on
whether you have chosen BUTTON or
TRIGGER in the START option of the
GAME TIMER Menu (detailed above).
By starting the game timer using your
chosen method, the timer will start to
count backwards, in seconds, towards
zero.
If an alarm time has been set, the display
will ash when the timer reaches the
designated alarm time. The display will
continue to ash every two seconds
until the timer reaches 0 minutes and
0 seconds, when GAME OVER will be
displayed until the game timer is reset.
If no alarm time has been set, the display
will still ash GAME OVER when the
game timer reaches 0 minutes and 0
seconds.
To stop the game timer, push and release
the Lower pushbutton. The game
timer will pause at whatever time it had
counted down to.
To reset the game timer, press and hold
the Lower pushbutton for 1 second.
The game timer will return to its preset
value. The game timer will also be reset
whenever the Eclipseblade Zero.B is
switched off.
Using Zero.B
16
Using Zero.B
17