User's Manual

The Rate of Fire (ROF) option is a
means by which you can monitor your
rate of re whilst using the Eclipseblade
Zero.B. The Rate of Fire screen looks
like this:
RATE OF FIRE OPTION
Breech
Sensor Indicator
Screen Name
Battery Level
Indicator
With the breech sensor on (and no paint
present), the rate of re will be limited by
your Cocking Time Out setting as it will
determine the length of time the breech
is held open waiting for a ball to fall into
the breech.
To use the Rate of Fire screen without
shooting paint, simply switch the breech
sensor off using the Raise pushbutton.
The Rate of Fire Indicator records every
pull and release of the trigger over a
period of one second and calculates the
number of valid shots that were red
during that period.
The current Rate of Fire is displayed in
the top right hand corner. The maximum
Rate of Fire that has been achieved
is displayed in the bottom right hand
corner.
To reset the maximum Rate of Fire
simply push and hold the Lower
pushbutton for a 1 second period.
Current
Rate of Fire
Maximium
ROF Achieved
Graphic Option
The GRAPHIC option is a means
by which you can display either the
standard Eclipseblade Zero.B logo or a
custom graphic of your choice that has
been uploaded using the Eclipseblade
Programmer Kit (sold separately). When
GRAPHIC is chosen from the Display
menu, it simply displays the graphic that
you have chosen whilst the frame is in
use.
REFLECTIVE BREECH SENSOR
The Eclipseblade Zero.B is designed to
be used with a Reective breech sensor.
The breech sensor is an advanced anti-
chop eye. When the breech sensor is
on, the software will prevent the breech
from closing until a ball is detected in
the breech. In this way the Eclipseblade
Zero.B prevents the bolt from closing
prematurely and chopping or trapping a
paintball.
The Eclipseblade Zero.B is compatible
with the Eclipseblade E2 Break-beam
eye kit, available separately from
www.planeteclipse.com
Using Zero.B
10
Using Zero.B
11