User's Manual

Scroll through the POWER Menu until
the LIGHT option is displayed and then
press Select. This will display the cur-
rent backlight option on the Backlight
(LIGHT) Menu:
Press the Lower pushbutton to scroll
down through each of the options on the
Backlight (LIGHT) Menu. Once the last
option has been displayed, pressing the
Lower pushbutton will cause the rst
option to be displayed.
Press the Raise pushbutton to scroll up
through each of the options on the Back-
light (LIGHT) Menu. Once the rst option
has been displayed, pressing the Raise
pushbutton will cause the last option to
be displayed.
Press the Select pushbutton to select the
displayed option.
To have the backlight permanently on,
select the ON option.
To have the backlight permanently off,
select the OFF option.
To activate the backlight every time the
trigger is pulled, select the TRIGGER
option.
To activate the backlight every time a
push button is depressed, select the
BUTTON option.
Selecting CANCEL will terminate the se-
lection mode leaving the original choice
unchanged.
THE BACKLIGHT MENU
Scroll through the POWER Menu until
the Auto Off-time (AUT OFF) option is
displayed and then press Select. This
will display the current Auto-off option on
the Auto Off-time (AUT OFF) Menu:
Press the Lower pushbutton to scroll
down through each of the options on
the Auto Off-time (AUT OFF) Menu.
Once the last option has been displayed,
pressing the Lower pushbutton will
cause the rst option to be displayed.
Press the Raise pushbutton to scroll up
through each of the options on the Auto
Off-time (AUT OFF) Menu. Once the
rst option has been displayed, pressing
the Raise pushbutton will cause the last
option to be displayed.
Press the Select pushbutton to select the
displayed option.
To set the Zero.B to never power down
after a period of inactivity, select the
NEVER option.
To set the Zero.B to power down after ten
minutes of inactivity, select the 10 MIN
option.
To set the Zero.B to power down after
twenty minutes of inactivity, select the 20
MIN option.
To set the Zero.B to power down after
thirty minutes of inactivity, select the 30
MIN option.
To set the Zero.B to power down after
sixty minutes of inactivity, select the 1
HOUR option. Selecting CANCEL will
terminate the selection mode leaving the
original choice unchanged.
SELECTING THE AUTO-OFF TIME
Advanced Set-Up
42
Advanced Set-Up
43