User's Manual

THE RELEASE pARAmETER
(RELEASE)
The RELEASE parameter is used to set the minimum
amount of time that the trigger must be released
before it is recognised as a valid trigger release. This
parameter can be set between 3.0 and 25.0 ms in 0.1
ms increments.
THE bAND HIGH pARAmETER
(bAND HI)
The BAND HI parameter is only available if OPTO has
been selected in the HARDWARE menu. BAND HI
the point at which the trigger is considered pulled and is
adjustable between 51% and 99% in 1% increments.
45.
ADvANCED SET-Up