User's Manual

THE LIGHT pARAmETER
(LIGHT)
The LCD backlight is illuminated whenever any of the
buttons are pressed on the Etek STAR Frame. The LIGHT
parameter is used to set the amount of time that the
backlight stays lit between 0.0 and 20.0 seconds in 0.5
second increments. Setting this parameter to 0.0 will
prevent the backlight from coming on when a button is
pressed.
THE SLEEp pARAmETER
(SLEEp)
If the Etek STAR Frame is inactive for a period of time
then it will automatically switch off in order to save
power. The SLEEP parameter is used to set that time
between 0 and 60 minutes in 5 minute increments.
Setting this parameter to 0.0 will prevent the Etek STAR
frame from automatically switching off.
41.
ADvANCED SET-Up