User's Manual

THE SUSTAIN RATE
pARAmETER (SUSTAIN)
Once the Etek STAR Frame is ramping the user has to
continue to pull the trigger at a minimum rate in order to
maintain the ramping. This parameter sets this rate and
can be between 5.0 and 15.0 pulls per second in 0.1
pulls per second increments.
THE RAmp RESTART
pARAmETER (RESTART)
The RESTART
after the last trigger pull during which the ramp can be
restarted with a single trigger pull. If a trigger pull occurs
after the RESTART time has expired, then the other ramp
start conditions have to be met before ramping will
restart. This parameter can be set between 0.0 and 1.0
seconds in 0.1 second increments.
39.
ADvANCED SET-Up