User's Manual

THE RAmp START pARAmETER
(pULL NO)
The parameter sets the number of trigger pulls that are
required at the KICK IN rate before ramping will start.
The parameter can be set between 4 and 9 pulls in
increments of 1.
THE RAmp kICk-IN
pARAmETER (kICk IN)
This parameter sets the minimum rate at which the user
has to pull the trigger in order to start ramping. This
parameter can be set between 5.0 and 15.0 pulls per
second in 0.1 pulls per second increments.
38.
ADvANCED SET-Up