User's Manual

THE RAmp TYpE pARAmETER
(TYpE)
This parameter is used to select the ramping style and
has the following choices:-
> STEp: Step ramping will cause the Etek STAR Frame to
shoot in semi-automatic until a number of trigger pulls,
set by PULL NO, have been made at a minimum pull
rate, set by KICK IN
MAX ROF (or
ROF
CAP is off). Ramping is maintained as long as the user
continues to pull the trigger at a required rate set by
SUSTAIN.
> LINEAR: Linear ramping will cause the Etek STAR
Frame to shoot in semi-automatic until a number of
trigger pulls, set by PULL NO, have been made at a
minimum pull rate, set by KICK IN. At this point the rate

RATE up to a maximum rate
MAX ROF
Ramping is maintained as long as the user continues to
pull the trigger at a required rate set by SUSTAIN.
> CANCEL: Editing is cancelled and no changes are made
to the parameter.
THE LINEAR RAmp RATE
pARAmETER (RATE)
The parameter is only available when Linear Ramping is
selected and is used to set the percentage increase in

For example, if the user is pulling the trigger at a rate of
10 pulls per second and the RATE parameter is set to

15 balls per second.
This parameter can be set between 0 and 100% in 10%
increments.
37.
ADvANCED SET-Up