User's Manual

RATE OF FIRE WHEN bbSS
OFF pARAmETER (OFF ROF)
The OFF ROF parameter is used to control how fast the
Etek STAR Frame cycles when the Break-Beam Sensor
System is disabled. This parameter can be set between
4.0 and 15.0 balls per second and should always be set
to the slowest speed of the loading system in use.
THE RAmp SETTINGS mENU
(Rmp SET)
This menu is only available when ramping has been
selected with the MODE parameter and comprises a list
of parameters that control the way in which the Etek
STAR Frame ramps, as shown below:
36.
ADvANCED SET-Up