User's Manual

THE LOAD pRESET
pARAmETER CONT...
> CANCEL: Editing is cancelled and the parameter remains
unchanged.
> USER 1: 
that have been previously saved by the user.
> USER 2: 
parameters that have been previously saved by the user.
With the exception of FACTORY each of the Presets

mode of the Etek STAR Frame, leaving Filter, Timing and

THE SAvE pRESET
pARAmETER (SAvE)
This parameter is used to save the current set


> USER 1: Save the current parameters as the Preset
‘USER 1’
> USER 2: Save the current parameters as the Preset
‘USER 2’
> CANCEL: Editing is cancelled and the parameter remains
unchanged.
THE FIRING mODE pARAmETER
(mODE)

Etek STAR Frame and has the following choices:
> SEmI: 

> RAmp: 
above the rate at which the trigger is pulled once certain
criteria have been met. These criteria are set by the
parameters on the RAMP SET menu.
> CANCEL: Editing is cancelled and the parameter is
unchanged.
pLEASE NOTE: CERTAIN mODES mAY ONLY bE AvAILAbLE
IN CERTAIN COUNTRIES AND ON CERTAIN mODELS OF THE
ETEk STAR FRAmE.
34.
ADvANCED SET-Up