User's Manual
THE TOURNAmENT LOCk
pARAmETER (LOCk)
The Etek STAR Frame has a tournament lock which
prevents the user from making changes to any
parameter that affects the way in which the Etek STAR
Frame shoots without the use of tools.
This parameter is used to set the state of the tournament
lock and has the following choices:-
> OFF:
Turn off the tournament lock. The SETUP menu is
added to the MAIN menu, making it easily accessible by
pressing and holding the button.
> ON:
Turn on the tournament lock. The SETUP menu is
only accessible by removing the right hand cheek of
the rubber grips and then pressing and holding the red
SETUP button on the circuit board.
> CANCEL:
Cancel selection and leave the parameter
unchanged.
THE pRESET mENU (pRESET)
In order to simplify the set up of the Etek STAR Frame
selection. Choosing one of these presets will cause all
of the necessary parameters to be set in such a way
as to make the Etek STAR Frame comply with the rules
governing a particular paintball league. It is also possible
their own.
THE LOAD pRESET
pARAmETER (LOAD)
This parameter is used to load the required Preset
exception of FACTORY each of the Presets changes only
parameters unchanged.
> FACTORY:
Reset every parameter to the factory set
defaults. The Etek STAR Frame leaves the factory set in
this way and this is also described on the Run Screen
as SEMI.
> NppL:
Etek STAR Frame to comply with the 2007 NPPL rules
> pSp 07:
Etek STAR Frame to comply with the PSP 2007 rules
> pSp 08:
Etek STAR Frame to comply with the PSP 2008 rules
> mS 07:
Etek STAR Frame to comply with the Millennium Series
> mS 08:
Etek STAR Frame to comply with the Millennium Series
33.
ADvANCED SET-Up