User's Manual

THE AvERAGE RATE OF FIRE
When the Average ROF is selected for display
the Run Screen will look something like the
screen to the right. The value displayed in the
top right of the screen represents the number
of full cycles completed in the last second

number below it is the maximum average rate

maximum, press and hold the button for
0.5 seconds.
THE pEAk RATE OF FIRE
When the Peak ROF is selected
for display the Run Screen will look
something like the screen to the left,
which differs from the display of the
Average ROF by the inclusion of the
indicator ‘PK’. The value displayed in
the top right of the screen represents

last two shots. The number below it is

been recorded. To reset this maximum,
press and hold the button for
0.5seconds.
The Peak ROF is typically higher than
the Average ROF as it is much easier to

it is to maintain a string over a longer
period of time.
THE mENU SYSTEm
Behind the Run Screen is a structured menu system
comprised of multiple levels of menus. Each menu
contains a number of menu items and each menu
item can either be an editable parameter or a branch
to another menu. Branches always have an animated
graphic whereas parameters indicate their
current value.
The menu structure is shown in the following pages.
The menus are ‘smart menus’ in that they will expand
and contract depending upon the state of certain
parameters. For example, the MAX ROF parameter is
only visible when the ROF CAP parameter is set to ‘on’.
Smart menu items are indicated with a * in the table
below.
TYpICAL bRANCH
TYpICAL pARAmETER
23.
USING YOUR ETEk STAR FRAmE