User's Manual

UNDERSTANDING THE bbSS
INDICATOR (bbSS)
The BBSS is able to switch itself off in the event that a
blockage or contamination prevents it from functioning
correctly. In this instance, the BBSS will switch itself
back on once the blockage is cleared and the correct
operation can be resumed.
The BBSS Indicator on the main screen is used to
indicate the eight possible states of the BBSS as
follows:
bbSS ENAbLED AND bALL DETECTED



bbSS SENSOR FAULT HAS bEEN CLEARED
The sensor has been re-enabled. A ball is
detected and the Etek STAR Frame can be


bbSS ENAbLED NO bALL DETECTED

bbSS FAULT HAS bEEN CLEARED
The sensor is enabled. No ball is detected

To reset the BBSS icon, use the button
to switch off the BBSS and then back on
again.
bbSS DISAbLED

OFF ROF
parameter (SEE pAGE 34)
bbSS ENAbLED IN TRAINING mODE
The BBSS has been over-ridden as the
user has selected training mode. As the
user has chosen to leave the BBSS on, the

mode.
bbSS FAULT DETECTED
The system is disabled. The Etek STAR



bbSS DISAbLED IN TRAINING mODE
The BBSS has been over-ridden as the
user has selected training mode. As the
user has chosen to turn the BBSS off, the

OFF
ROF
parameter (SEE pAGE 34) .
21.
USING YOUR ETEk STAR FRAmE