User's Manual

USER INTERFACE
The Etek STAR Frame has a simple user interface
through which all aspects of it’s electronic control
system can be monitored and adjusted by means of the
three pushbuttons and graphical LCD which comprise
the Navigation Console.
SWITCHING ON
Pressing and holding the button will switch the Etek
STAR Frame on. The LCD display will show the Etek
STAR Frame logo. When the button is released,
the LCD will show the Run Screen, which is the screen
displayed during the normal use of the Etek STAR
Frame.
RUN SCREEN LAYOUT
The root of the user interface is the Run Screen. This
screen is the one most often displayed and provides
the user with essential feedback on the state of the Etek
STAR Frame. A typical Run Screen is shown on the right.
On the right of the screen is a display option that is
user selectable from the Main Menu (see page 27). This
option can be:-
> A GAmE TImER
> A SHOT COUNTER
> AN AvERAGE RATE OF FIRE
INDICATOR
> A pEAk RATE OF FIRE
INDICATOR

icons that provide graphical indication on different parts
of the Etek STAR Frame control electronics.
USER SELECTAbLE DISpLAY
OpTION
bREAk-bEAm SENSOR
SYSTEm INDICATOR
bATTERY LEvEL
INDICATOR / LOCk INDICATOR
20.
USING YOUR ETEk STAR FRAmE