Manual
23
GTEK170R
ELECTRONICS
LED PARAMETERS
The LED indicator communicates with the user through colour.
This overview page explains each colour and their roles once you enter the LED set-up mode (see page 22).
LED COLOUR PARAMETER DESCRIPTION
RED
SEMI ∞ Uncapped Semi-Automatic: one shot per trigger pull (no rate of re cap).
SEMI 15.0 Capped Semi-Automatic: one shot per trigger pull (15.0bps cap).
NXL 10.2 Capped Ramping: NXL compliant (10.2bps cap).
PSP 10.2 Capped Ramping: PSP compliant (10.2bps cap).
GREEN Maximum ROF (BS ON) This controls how fast the 170R can re with the breech sensor on. Capped modes only.
BLUE Maximum ROF (BS OFF)
This controls how fast the 170R can re with the breech sensor off. This should be set to the slowest speed
of the loader.
PURPLE Dwell This controls the amount of time that the solenoid is energised.
LIGHT BLUE Debounce This controls the amount of ‘anti-trigger bounce’ that is present.
FLASHING BLUE Factory reset
Press and hold the tournament lock button (page 32) for 2 seconds to restore all settings back to factory
standard. The LED will ash blue to conrm this has been successful.