Manual

ToswitchontheGSLpressthe buttontwiceinquicksuccession,
referredtoelsewhereinthismanualas‘double-clicking’.TheGSL
canalsobeswitchedonbypushingandholdingthe
button
(SEE
FIGURE3A)
.
1
Pressandholdthe
button
(SEEFIGURE3A)
untilthedisplayshows
“TURNOFF”.Releasethe
buttonandre-pressittoturnoffthe
GSL.Alternativelydoubleclickthe
buttontoenterthemenutree
thenpress
toturnofftheGSL.
1
Pullthetrigger
(LABELLED
A
INFIGURE3B)
tofiretheGSL.Theentire
firingsequenceiscontrolledelectronicallybytheGSLcircuitboard,
enablinganyusertoeasilyachievehighratesoffire.
1
The double clicking feature is user selectable, factory default is set to on. It can be turned off
using the Double Click parameter in the Hardware menu (see page 39).
sWiTCHing on THE gsL
sWiTCHing oFF THE gsL
Firing THE gsL
A
PLANET ECLIPSE ADVISES NOT TO DRY FIRE/SHOOT THE
MARKER WITHOUT PAINTBALLS.
PROLONGED DRY FIRING MAY LEAD TO DAMAGE/WEAR
OF THE INTERNAL COMPONENTS OF THE MARKER.
WARNING
FIG3A
FIG3B
8 Using THE gsL