Manual

A
B
D
E
C
TheEclipseGSLcomesasstandardwithanEclipseSL3Shaftbarrel.
1,4
ThebarrelscrewsintothebodyoftheGSLusingarighthandthread  meaningthatifyouholdtheGSL
pointingawayfromyouthebarrelscrewsintothebodyinacounter-clockwisedirection.
2
Thebarrelcomprisesoffiveparts,a14.5”barreltip
A
anda16”barreltip
B
anda0.681”
barrelback,a0.685”barrelbackanda0.689”barrelback.Theanybarreltipandbarrel
backarejoinedtogetherwitha
lefthandthread meaningthatifyouholdthebarrel,
withthebacknearestyou,thefrontunscrewsinacounter-clockwisedirection.The
boresizeofthebarrelbackisengravedattheendofthebarrelback
C
.
3

Onthebarrelbackthereisa016NBR70o-ring
D
whichpreventsthe
barrelfromvibratingloosefromtheGSLbodywhenthemarkeris
fired.Thereisalsoa016NBR70o-ringonthetipofthebarrel
back
E
helpswithalignmentwhenthetwosectionsare
screwedtogether.
Replaceandlubricatetheseo-ringswithEclipse
Greaseasnecessary.
sL3 sHaF T BarrEL
1
The bore size of your SL3 Shaft may vary according to the model of GSL you have.
2
The GSL will only accept COCKER threaded barrels. Do not use any other type of barrel thread.
3
The Eclipse SL3 Shaft front and back barrel sections are not interchangeable with older version shaft front
and back barrel sections (including Shaft3 barrel kits).
4
The model of barrel accompanying your GSL may differ from described.
70 TECHniCaL rEsoUrCEs