Manual

ThePULLTMparameterisusedtosettheminimumamountoftimethatthetriggermustbepulledbeforeitisrecognisedasa
validtriggerpull.Thisparametercanbesetbetween3.0and20.0millisecondsin0.1msincrements.
TheRELEASETMparameterisusedtosettheminimumamountoftimethatthetriggermustbereleasedbeforeitisrecognised
asavalidtriggerrelease.Thisparametercanbesetbetween3.0and25.0millisecondsin0.1msincrements.
ThePULLPTparameterisonlyavailableifOPTOhasbeenselectedintheHardwaremenu.PULLPTdefinesthepointatwhich
thetriggerisconsideredpulledandisadjustablebetween51%and99%in1%increments.
TheRELEASEPTparameterisonlyavailableifOPTOhasbeenselectedintheHardwaremenu.RELEASEPTdefinesthepointat
whichthetriggerisconsideredreleasedandisadjustablebetween1%and49%in1%increments.
PULL TM ParaMETEr
rELEasE TM ParaMETEr
PULL PT ParaMETEr*
rELEasE PT ParaMETEr*
aDVanCED sETUP 35