Manual

EveryGSLcomescompletewithanEclipsepushonpurgesystem
(POPS)whichprovidesadirectconnectionforapresetairsystem.
BeforescrewinganairsystemintothePOPSensurethatthebonnet
isdisengagedinitsforwardposition
(SEEFIGURE10A) .Ifthebonnetis
engaged,depressthelatchbuttonandslidethebonnetforward.

CheckthatthePOPSretainingscrewsaretight.IfthePOPScanbe
movedontheframethescrewsaretoolose.Usea5/32”hexkeyto
tightenthescrews.

ScrewthepresetairsystemintothePOPS
(SEEFIGURE10B) sothat
thebottlescrewsinallthewayandistight.
PullthebonnetbackwardsallowingthePOPSpintodepressthe
valvepininthepresetairsystemcausingtheGSLtobecome
pressurised(providingthatthereissufficientairinyourtank)
(SEE
FIGURE10C) .Whenthebonnethasbeenpulledbackfarenoughit
engageswiththePOPSbody.
1,2


YouhavenowinstalledapresetairsystemontoyourGSL.















1
High, mid and low pressure output preset air systems can be used with the GSL, providing the
GSL has the SL4 inline regulator originally supplied with the marker.
2
The force needed to engage the bonnet may vary depending on the output pressure and
internal design of the air system being used.
ConTinUED
FIG10A
FIG10B
FIG10C
Using THE gsL 17