Manual

56
GEO:CS1
SUPPORT
E-PORTAL
E-portal is a PC application that lets you connect to your CS1 via a USB
cable. Amongst other things you can use E-portal to:
1
Upgrade the CS1 rmware.
2
Change the start-up splash screen.
3
Modify control parameters.
E-portal can be downloaded from the Planet Eclipse website (see below).
Requirements
A USB Type A - Micro B
1
cable is required to connect the CS1 to a PC.
This cable is not supplied with the CS1 but is available from any good
electrical retailer.
1 This is the older, 5 pin Micro B connector NOT the newer USB 3.0 Micro B connector.
Download E-Portal from our marker support page below:
PLANETECLIPSE.COM/EPORTAL
WARNING!
Ensure the CS1 is fully unloaded before connecting to a PC. The air system and
loader should be disconnected and any paintballs should be removed from the
breech of the marker.
WARNING