Manual

36
GEO:CS1
ELECTRONICS
THE MENU TREE
MAIN MENU
HARDWARE
TRIGGER
OPTO (Default) Use OPTO to detect trigger operation
SWITCH Use micro-switch to detect trigger operation
CANCEL CANCEL TRIGGER detection Selection
SOUND
ON (Default) Turn On audible indicators
OFF Turn Off audible indicators
CANCEL CANCEL audible SOUND indicator Selection
TONES
ON (Default) Turn On audible tone when any button is pressed (SOUND dependant)
OFF Turn Off audible tone when any button is pressed (SOUND dependant)
CANCEL CANCEL audible tone Selection
BACKLIGHT
00:00 - 00:20 s Time in seconds (s) that the backlight stays on for (00:00 = no backlight). Default 00:06 s
RED LEVEL
0 -100% Percentage of RED light in the backlight (BACKLIGHT dependant)
GRN LEVEL
0 -100% Percentage of GREEN light in the backlight (BACKLIGHT dependant)
BLU LEVEL
0 -100% Percentage of BLUE light in the backlight (BACKLIGHT dependant)
CONTRAST
0 - 30 LCD contrast level. Default 14
AUTO OFF
05:00 - 20:00 m Time in minutes (m) after which the CS1 will automatically switch itself Off. Default 20:00 m
DBL CLICK
ALL (Default) Double click is fully enabled
POWER UP Double click to activate POWER up only
NONE Double click is fully disabled
CANCEL CANCEL the DOUBLE CLICK Selection
BACK
TRAINING
ON Training mode enabled
OFF Training mode disabled
CANCEL Cancel the TRAINING MODE Selection