Manual

FIG-1
FIG-3
FIG-2
FIG-4
33
GEO:CS1
ELECTRONICS
USER INTERFACE PARAMETERS
FIG-1 - GAME TIMER MENU
The following parameters control the game timer.
FIG-2 - GAME PARAMETER
This sets the game timer, which counts down from the time set, to zero. When the timer reaches zero the
audible alarm will sound (if the alarm parameter is set to On) and GAME OVER shows on the LCD screen.
This parameter can be set between 00:00 and 60:00 minutes in 10 second increments.
FIG-3 - ALARM (1 AND 2) PARAMETER
This sets the Alarm(s). Once the game timer counts down to the designated alarm time, the audible alarm
will sound (if the SOUND parameter is set to On). The timer will continue to count down until the GAME
PARAMETER has expired.
This parameter can be set between 00:00 and 60:00 minutes in 10 second increments.
FIG-4 - START PARAMETER
This sets which function activates the game
timer’s countdown.
> BUTTON: Select button starts the timer.
> TRIGGER: Trigger pull starts the timer.
> CANCEL: Editing is cancelled and unchanged.