Manual

FIG-1
FIG-2
FIG-3
31
GEO:CS1
ELECTRONICS
USER INTERFACE PARAMETERS
FIG-1 - CONTRAST PARAMETER
This sets the contrast level of the LCD screen.
This parameter can be set between 0 and 30 and in increments of 1.
FIG-2 - DBL CLICK PARAMETER
This enables/disables the option to double-click
the Select button as opposed to holding it down to
switch the CS1 on and o.
> NONE: Double-click disabled.
> POWER UP: Double-click to power up only.
> ALL: Double-click to also access menus.
> CANCEL: Editing is cancelled and unchanged.
FIG-3 - AUTO OFF PARAMETER
This sets the amount of time that elapses before the CS1 switches itself o.
This parameter can be set between 05:00 and 20:00 minutes and in increments of 5 minutes.