Manual

FIG-1

FIG-3

FIG-2

FIG-4

GEO:CS1

FIG-1 - BACKLIGHT PARAMETER

This sets the time that the LCD backlight is illuminated for after a push-button is pressed.

This parameter can be set between 00.00 and 00.20 seconds. At 00.00 no backlight will be present.

FIG-2 - RED LEVEL PARAMETER

This sets the percentage of red in the LCD backlight colour.

This parameter can be set between 0% and 100% increments.

FIG-3 - GRN LEVEL PARAMETER

This sets the percentage of green in the LCD backlight colour.

This parameter can be set between 0% and 100% increments.

FIG-4 - BLU LEVEL PARAMETER

This sets the percentage of blue in the LCD backlight colour.

This parameter can be set between 0% and 100% increments.

ELECTRONICS

USER INTERFACE PARAMETERS