Manual

FIG-1

FIG-3

FIG-2

FIG-4

GEO:CS1

ELECTRONICS

USER INTERFACE PARAMETERS

FIG-1 - FILTER MENU

The FILTER menu parameters tune the CS1 software lters which prevent the CS1 from ring unless all of

the necessary conditions are met. Factory default settings are suitable for most set-ups however, certain

loader and trigger set-ups may require more modication.

FIG-2 - DEBOUNCE PARAMETER

This sets the amount of trigger bounce that may be

present and can be set from level 1 to level 9.

> LEVEL1: Least ltering (most bounce).

> LEVEL9: Most ltering (least bounce).

> CANCEL: Editing is cancelled and unchanged.

FIG-3 - EMPTY PARAMETER

This sets the time delay between the breech sensor (BS) recognising the breech as EMPTY

(bolt retracted) and the next shot being allowed to re.

This can be set between 1.0 and 20.0 milliseconds in 0.1 millisecond increments.

FIG-4 - FULL PARAMETER

This sets the delay between the paintball landing in the breech and the marker being allowed to re.

This parameter can be set between 1.0 and 20.0 milliseconds in 0.1 millisecond increments.