Manual

FIG-1

FIG-3

FIG-2

FIG-4

GEO:CS1

ELECTRONICS

USER INTERFACE PARAMETERS

FIG-1 - TIMING MENU

The following TIMING parameters control the timing of the solenoid valve.

FIG-3 - FSD COMP PARAMETER

‘First Shot Drop o’ is a reduction in velocity of the rst shot when the marker has not been red for

some time. This adds extra DWELL time to the rst shot to compensate.

This parameter can be set between 0.0 and 5.0 milliseconds.

FIG-4 - FSD DLY PARAMETER

The time before the FSD COMP is applied to a shot.

This parameter can be set between 00.00 and 04.00 minutes.

FIG-2 - DWELL PARAMETER

Sets the amount of time the solenoid valve is energised, therefore how much gas is used per shot.

Too low will result in low velocity shots and excessive velocity/shot uctuations, too high will waste gas.

This parameter can be set between 15.0 and 35.0 milliseconds (default is 27.0).