Manual
FIG-1
11
GEO:CS1
QUICK START
SOLENOID FLOW RESTRICTOR (SFR)
FIG-1
The Solenoid Flow Restrictor (SFR)
A
controls the exhaust ow from
the bolt through the solenoid. Adjusting the SFR will change the speed
of the bolt’s forward stroke.
Use a 1/8 hex key
B
and turn clockwise to decrease the ow
(reducing the speed of the bolt) or counter-clockwise to increase the
ow (increasing the speed of the bolt).
Minimum ow (fully clockwise) will improve the smoothness of the
ring cycle but will lower the cycling rate.
Maximum ow (fully counter-clockwise) will reduce the smoothness of
the ring cycle but increase the cycling rate.
The SFR ow rate can be set anywhere between maximum and
minimum ow.
1
ALWAYS chronograph your marker once any changes have
been made. Changes to the SFR ow can directly aect the
velocity of the paintballs.
1
B
A
HEX
1/8
WARNING!
Setting the ow restrictor too low (especially in extreme weather conditions) may
result in: low velocity, inconsistent velocity or preventing the bolt from cycling.
If this occurs, increase the SFR ow setting.
WARNING
–+