Manual

The Geo3 is compatible with Eclipse E-Portal Software.
This software is an upgrade to the Geo3 platform.
The Eclipse E-Portal Software, USB cable and USB
daughter board are sold as a kit, separate from the
Geo3.
1
The Eclipse E-Portal allows you to connect the Eclipse
Geo3 to a PC, where a number of operations can be
performed:
2
UPDATE THE MARKERS FIRMWARE - from time to time
new firmware may be released by Planet Eclipse. You
can now download and install the latest firmware using
the Eclipse E-Portal.
ALTER THE ELECTRONIC PARAMETERS - the
Eclipse E-Portal will give you full access to all of the
parameters on the Geo3 circuit board.
CUSTOMISE SCREEN GRAPHICS - Customise the boot
up screen graphic.
1
If you already own an Eclipse E-portal kit (such as the kit included
with the Eclipse SLS), this kit will be compatible with the Geo3.
2Minimum system requirements :
Monitor Resolution - 1024x768 or higher, CD-ROM
drive,Keyboard, Mouse, USB socket, 5MB of hard
disk space, 1GHz Processor, 384Mb RAM, Windows
XP/Windows Vista/Windows 7, internet connection
(required for software and firmware updates).
THE ECLIPSE E-PORTAL
WINDOWS® PC
USB CABLE
EXPANSION BOARD
PLANET ECLIPSE
GEO3
DE-GAS YOUR MARKER, DISCHARGING ANY
STORED GAS IN A SAFE DIRECTION, AND REMOVE
THE BARREL, LOADER, AIR SYSTEM AND ANY
PAINTBALLS TO MAKE THE MARKER EASIER AND
SAFER TO WORK ON.
WARNING
Contents
Orientation
Quick Set-up
Using the Geo3
Menu Tree
Advanced Set-up
Maintenance
Fault Finding
Service Centres
Parts List
Spares
Index
81.
Spares
QUICK GUIDE