Manual

SYMPTOM POSSIbLE CAUSE
Although a fresh battery has been fitted, the
Geo3 will not switch on.
The battery does not seem to last very long.
The Geo3 leaks from the solenoid Assembly.
Geo3 leaks down the barrel.
Gas vents quickly down the barrel as soon
as the Geo3 is gasses up
The Geo3 is chopping or trapping paint.
The battery has been fitted incorrectly.
The battery terminals are not making proper
contact with the battery.
The battery type is of a low quality.
Check that the 3 solenoid gaskets are intact
and seated in their designated pockets both in
and around the Solenoid Manifold.
Damaged Geo3 Solenoid Valve.
Geo3 Solenoid Assembly is over-pressurising.
Debris on / damage to poppet.
Main Prop Shaft 14 x2 NBR 70 o-ring is dam-
aged, dirty or dry.
Internal 017 NBR 70 o-ring and external 020
NBR 70 o-rings on Bolt Can are damaged,
dry or dirty.
Bolt is stuck in a forward position.
Main Prop Shaft 014x2 o-ring is damaged or
an incorrect size.
Loader has too high a force setting or paint is
poor quality.
The Break Beam Sensor System is switched
off.
The bolt is dirty causing the incorrect detection
of paintballs.
Fit the Battery correctly with the positive
terminal nearest to the side of the frame.
Remove the Battery, gently bend the terminals
towards where the Battery will sit and then
replace the Battery.
Use an alkaline or metal hydride battery. Do not
use a low quality or rechargeable battery.
Replace the solenoid gasket if damaged.
Replace Geo3 Solenoid Valve
Check the inline regulator output pressure and
consequent velocity. Adjust accordingly.
The inline regulator is supercharging.
Clean/Replace poppet.
Replace, clean and lubricate 14 x 2 NBR 70
o-ring on Prop Shaft.
Replace, clean and lubricate 017 NBR 70 o-ring
and 020 NBR 70 o-rings on Bolt Can.
Push Bolt backwards.
Replace with a 014x2 size o-ring.
Adjust loader setting and try another brand of
paint.
Switch on the Break Beam Sensor System.
Clean the bolt and breach
SOLUTION
Contents
Orientation
Quick Set-up
Using the Geo3
Menu Tree
Advanced Set-up
Maintenance
Fault Finding
Service Centres
Parts List
Spares
Index
71.
Fault Finding
QUICK GUIDE