Manual

Using a dry cotton bud, clean the internal 008 NBR70
o-ring that sits inside the top section of the adjuster
top. Then using a small hex key gently apply Eclipse
Grease to the o-ring
(See Figure 17F).
1
At this point if you are maintaining the inline regulator
to fix a supercharging issue, turn to page 56 to the
‘ADVANCED SL3 INLINE REGULATOR MAINTENANCE’
section. If you are not fixing a supercharging issue then
there is no need to perform this advanced maintenance
procedure.
Re-install the adjuster assembly into the bottom section
of the inline regulator threaded end first. Apply light
pressure to the top of the adjuster, while using a 1/8”
hex turn the adjuster screw counter-clockwise until is
stops at the base of the inline regulator
(See Figure
17G)
.
2
Take the piston, inspect for damage and clean the
016NBR70 o-ring at the top. Re-lubricate it with a light
application of Eclipse Grease
(See Figure 17H).
Place the inline regulator spring over the piston, then
insert the piston and spring into the top of the inline
regulator top section
(See Figure 17I).
1
With the top section of the inline regulator upside down,
screw the top and bottom sections together. Re-attach
the inline regulator to the Geo3 FRM
(See Figure 17J), then re-connect the macroline
hose to the fitting on the regulator swivel.
Basic cleaning of the SL3 inline regulator is complete.
1
If any o-rings are damaged then replace them. Extra o-rings are
available in parts kits available at www.planeteclipse.com
2
We recommend a starting position for the Adjuster Screw of 4
1/2
turns
in from flush with the bottom of the inline regulator.
WARNING: THE SPRING IN THE GEO3
INLINE REGULATOR HAS BEEN DESIGNED
SPECIFICALLY FOR THE ECLIPSE GEO3. USING
ANY OTHER SPRING WILL DAMAGE THE GEO3
AND VOID YOUR WARRANTY.
F IG 17E
F IG 17G
F IG 17I
F IG 17h
F IG 17J
F IG 17F
WARNING: IF YOU ARE AT ALL UNSURE AT
PERFORMING THE MAINTENANCE PROCEDURE
PLEASE CONTACT YOUR NEAREST ECLIPSE SERVICE
CENTRE. (SEE PAGE 75)
WARNING
Contents
Orientation
Quick Set-up
Using the Geo3
Menu Tree
Advanced Set-up
Maintenance
Fault Finding
Service Centres
Parts List
Spares
Index
55.
Maintenance
QUICK GUIDE