Manual

TIMER
THE GAME TIMER MENU
This menu is comprised of parameters that control
the operation of the Game Timer.
GAME
THE GAME TIME PARAMETER
This parameter is used to set the Game
Time; the time from which the game timer
counts down to zero. This parameter can
be set between 00:00 and 60:00 minutes
in 10 second increments .The factory
default is 07:10 (7 minutes 10 seconds).
When the game timer reaches 00:00,
GAME OVER will be displayed and the
audible alarm will sound continually,
provided that the SOUND parameter is set to ‘ON’.
ALARM
THE ALARM TIME PARAMETER
An alarm condition is generated whenever
the Game Timer counts down to a specific
time set by the ALARM parameter. This
parameter can be set between 00:00 and
10:00 minutes in 10 second increments.
When the alarm condition is generated
the Game Timer will start to flash and
the audible alarm will sound every second,
provided that the SOUND parameter is set to ‘ON’.
START
THE TIMER START PARAMETER
This parameter is used to select the event
which will cause the Game Timer to begin
counting down. This parameter has the
following choices:
> BUTTON: Pressing the
button will
start the Game Timer.
> TRIGGER: Pulling the trigger will start
the Game Timer.
> CANCEL: Cancel editing and leave the parameter
unchanged.
Contents
Orientation
Quick Set-up
Using the Geo3
Menu Tree
Advanced Set-up
Maintenance
Fault Finding
Service Centres
Parts List
Spares
Index
51.
Advanced Set-up
QUICK GUIDE