Manual

GRN LEVEL
THE LCD BACKLIGHT GREEN LEVEL
PARAMETER
The percentage of green light emitted
from the LCD backlight.
BLU LEVEL
THE LCD BACKLIGHT BLUE LEVEL
PARAMETER
The percentage of blue light emitted from
the LCD backlight.
CONTRAST
THE LCD CONTRAST LEVEL PARAMETER
Sets the contrast level of the LCD. This
parameter is adjustable between 0 and 30
in increments of 1.
AUX OUT
THE AUX OUT PARAMETER
This parameter turns on and
off the AUX socket on the PCB.
The choices available for this parameter
are:
>OFF: AUX socket switched off.
>ON: AUX socket switched on.
>CANCEL: Cancel editing and leave the
parameter unchanged.
DBL CLICK
THE DOUBLE CLICKING PARAMETER
This parameter is used to select where
double-clicking the
button can be used.
The choices available for this parameter
are:
>NONE: Double clicking is disabled
entirely. To power up the Geo3 and enter
the Main Menu the user needs to push
and hold the
button.
>POWER UP: Double clicking only works when
powering up the Geo3. To enter the Main Menu the
user still needs to push and hold the
button.
>ALL: Double clicking works when powering up the
Geo3 and entering the Main Menu. Push and hold still
works for these procedures as well.
>CANCEL: Cancel editing and leave the
parameter unchanged.
AUTO OFF
THE AUTO POWER OFF TIME PARAMETER
The time that has to elapse before the
Geo3 switches itself off if not used. The
parameter can be set between 5 and 60
minutes.
Contents
Orientation
Quick Set-up
Using the Geo3
Menu Tree
Advanced Set-up
Maintenance
Fault Finding
Service Centres
Parts List
Spares
Index
49.
Advanced Set-up
QUICK GUIDE