Manual

FSD DLY
THE FIRST SHOT DROP-OFF DELAY
PARAMETER
The time that has to elapse before the
FDS COMP is applied to a shot following a
previous shot. This parameter can be set
between 00:00 and 04:00 minutes.
FILTER
THE FILTER MENU
The parameters on the FILTER menu are all used
to tune the Geo3’s software filters which prevent
the Geo3 from firing unless all of the necessary
conditions are met. The factory default settings will
be suitable for most set-ups, however certain loader
and trigger set-ups may require modification of one
or more of these parameters.
DEBOUNCE
THE DEBOUNCE PARAMETER
The DEBOUNCE parameter is used to
combat any trigger bounce that might
occur in the Geo3 and can be set between
level 1 and level 9 in one level increments.
> LEVEL 9: Level 9 providing the most
filtering (least ‘bouncy’).
> LEVEL1: Level 1 providing the least
filtering (most ‘bouncy’).
> CANCEL: Cancel editing and leave the parameter
unchanged.
EMPTY
THE BREECH EMPTY TIME PARAMETER
In order for the BBSS to function correctly
it must first detect that the Bolt is fully
retracted and the breech is empty, and
then detect that a paintball is loaded into
the breech before the Geo3 is allowed to
fire. The parameter can be set between
1.0 and 20.0ms in 0.5ms increments.
(CONTINUED OVERLEAF)
Contents
Orientation
Quick Set-up
Using the Geo3
Menu Tree
Advanced Set-up
Maintenance
Fault Finding
Service Centres
Parts List
Spares
Index
45.
Advanced Set-up
QUICK GUIDE