Manual

BS ON ROF
THE MAXIMUM RATE OF FIRE PARAMETER
The BS ON ROF parameter is used to set
the maximum achievable rate of fire from
the Geo3. The value of this parameter can
be adjusted between 4.0 and 30.0 balls
per second in 0.1bps increments.
1
The BS ON ROF parameter will only be
displayed if you have set the ROF CAP
parameter to ‘ON’.
BS OFF ROF
THE RATE OF FIRE WHEN BBSS IS OFF
PARAMETER
The BS OFF ROF parameter is used to
control how fast the Geo3 cycles when the
Break Beam Sensor System is disabled.
This parameter can be set between 4.0
and 15.0 balls per second and should
always be set to the slowest speed of the
loading system in use.
1
1
Always calibrate your Geo3 ROF CAP parameters to the local field
BPS meter as readings may vary from meter to meter.
42.
ADVANCED SET-UP