Manual

PRESET
THE PRESET MENU
In order to simplify the set up of the Geo3 a number
of preset configurations are available for selection.
Choosing one of these presets will cause all of the
necessary parameters to be set in such a way as to
make the Geo3 comply with the rules governing a
particular paintball league
1
. It is also possible for the
user to save up to two preset configurations of their
own.
LOAD
THE LOAD PRESET PARAMETER
This parameter is used to load the
required preset configuration and has the
following choices:
> USER 1: Load a set of custom firing
mode parameters that have been
previously saved by the user.
> USER 2: Load a set of custom firing
mode parameters that have been
previously saved by the user.
> FACTORY: Reset every parameter to the factory set
default. The Geo3 leaves the factory set in this way.
> NPPL: Load a set of parameters that configures the Geo3
to comply with the NPPL rules governing firing modes.
1,2
> PSP 10: Load a set of parameters that configures the
Geo3 to comply with the PSP rules governing firing modes
in lower divisions (10bps).
1,2
> PSP 12: Load a set of parameters that configures the
Geo3 to comply with the PSP rules governing firing modes
in higher divisions (12bps).
1,2
> MS10: Load a set of parameters that configures the Geo3
to comply with the 2010 Millennium Series rules governing
firing modes.
1,2
> CANCEL: Editing is cancelled and the parameter
remains unchanged.
SAVE
THE SAVE PRESET PARAMETER
This parameter is used to save the current
set of parameters as a user defined
custom preset configuration.
This parameter has the following choices:
> USER 1: Save the current parameters as
the preset ‘USER 1’.
> USER 2: Save the current parameters as
the preset ‘USER 2’.
> CANCEL: Editing is cancelled and the parameter
remains unchanged.
1
Some presets and fire modes may only be available in certain
countries and on some models of the Geo3.
2
All presets are correct at time of printing. It is the users
responsibility to ensure that the loaded preset complies with the
event rules the marker is intended to be used in.
40.
ADVANCED SET-UP