Manual

ACCESSING THE MENU
SYSTEM
To access the Main menu from the run screen double-
click the
button and the first item on the Main
menu will be displayed. Alternatively, push and hold
the
button for 2 seconds.
Some of the parameters in the menu system can have
a tournament lock applied to them. This lock can be
toggled on and off by pressing the tournament lock
button on the circuit board
(see
A
in FIGURE
15A)
. If you try to select a parameter that is locked,
the locked display will show on the screen.
MOVING AROUND THE
MENUS
Press and release the
button to display the next
item on the menu. When the last menu item is
displayed, pressing the
button will display the first
item.
Press and release the
button to display the previous
item on the menu. When the first menu item is
displayed, pressing the
button will display the last
item.
When the displayed item is a branch, as indicated by
an animation on the right of the screen, press the
button to move to another menu.
ALTERING PARAMETERS
When the displayed item is a parameter, as
indicated by a parameter value on the right of
the screen, pressing the
button will activate
the EDIT mode which allows the parameter
value to be altered. When EDIT mode is active,
the black box surrounding the text disappears.
There are two types of parameter, numeric
parameters and choice parameters.
A numeric parameter has a numeric value
whereas a choice parameter is one that has
a small number of distinct choices. Altering
parameter values is essentially the same for both types of
parameter.
To alter a numeric parameter, first activate the EDIT mode.
Press the
button to increase the parameter value one
step at a time. Press and hold the
button to increase
the parameter value rapidly. When the value reaches it’s
maximum it will revert to its minimum value. Press the
button to decrease the parameter value one step at a time.
Press and hold the
button to decrease the parameter value
rapidly. When the value reaches its minimum it will revert to
it’s maximum value. When the required parameter value is
displayed press the
button to accept the value and end the
EDIT mode.
To alter a choice parameter, first activate the EDIT mode.
Press the
button to display the next choice in the list. When
the last choice is displayed, pressing
will display the first
choice in the list. Press the
button to display the previous
choice in the list. When the first choice is displayed, pressing
the
button will display the last choice in the list. When the
required choice is displayed press the
button to accept
the choice and end the EDIT mode. If the displayed choice
is cancel then pressing the
button will end the EDIT mode
and restore the parameter to the value that is was prior to
editing.
WARNING: THE MARKER CAN BE FIRED WHILE
NAVIGATING ALL MENUS AND PARAMETERS.
A
F IG 15 A
WARNING
38.
ADVANCED SET-UP