Manual

Every Geo3 comes complete with an Eclipse Push

On/Off Purge System (POPS) which provides a direct

connection for a preset air system. Before screwing

an air system into the POPS ensure that the bonnet is

disengaged in its forward position

(See Figure 9A).

If the bonnet is engaged, depress the latch button and

slide the bonnet forward.

Screw the preset air system into the POPS

(See

Figure 9B)

so that the bottle screws in all the way and

is tight. Pull the bonnet backwards allowing the POPS

pin to depress the pin in the preset air system causing

the Geo3 to become pressurised (providing that there is

sufficient air in your tank)

(See Figure 9C). When the

bonnet has been pulled back far enough it engages with

the POPS body.

1,2

You have now installed a preset air system onto your

Geo3.

High, mid and low pressure output preset air systems can be used

with the Geo3, providing the Geo3 has the SL3 inline regulator

originally supplied with the marker.

The force needed to engage the bonnet may vary depending on the

output pressure and internal design of the air system being used.

FIG 9A

FIG 9b

FIG 9C

Contents

Orientation

Quick Set-up

Using the Geo3

Menu Tree

Advanced Set-up

Maintenance

Fault Finding

Service Centres

Parts List

Spares

Index

21.

Using the Geo3

QUICK GUIDE