Manual

GEO3.5 MANUAL 81
CONTINUED
OPTO (Default) Use OPTO sensor to detect trigger operation
SWITCH Use micro-switch to detect trigger operation
CANCEL Cancel trigger detection method selection
LO PWR (Default) Select standard solenoid power level
HI PWR Select high power level for solenoid
CANCEL Cancel solenoid power level selection
OFF Turn off audible indicator
ON (Default) Turn on audible indicator
CANCEL Cancel audible indicator selection
OFF Turn off audible tone when any button is pressed (SOUND dependant)
ON (Default) Turn on audible tone when any button is pressed (SOUND dependant)
CANCEL Cancel audible tone selection
00:00 - 00:20 Time in seconds that the backlight comes on for (00:00 = no backlight). (Default 00:06)
0 - 100% Percentage of red light in backlight (BACKLIGHT dependant)
0 - 100% Percentage of green light in backlight (BACKLIGHT dependant)
0 - 100% Percentage of blue light in backlight (BACKLIGHT dependant)
0 - 30 LCD contrast level. (Default 14)
OFF AUX socket output off
ON (Default) AUX socket output on
CANCEL Cancel AUX socket selection
05:00 - 60:00 Time in minutes after which the GEO3.5 automatically powers off. (Default 20:00)
NONE Double click is disabled entirely
POWER UP Double click for power up only
ALL (Default) Double click is fully enabled
CANCEL Cancel the double click selection
Return to Main Menu
OFF Training mode disabled
ON Training mode enabled
CANCEL Cancel training mode selection
TRIGGER
HARDWARE
SOLENOID
TRAINING
SOUND
TONES
BACKLIGHT
RED LEVEL
GRN LEVEL
BLU LEVEL
CONTRAST
AUX OUT
AUTO OFF
DBL CLICK
BACK