Manual

80 GEO3.5 MANUAL
CONTINUED
STEP (Default) Step ramping
LINEAR Linear ramping
CANCEL Cancel selection
0 - 100% Percentage linear ramp rate (TYPE dependant). (Default 50%)
3 - 9 Number of shots before ramping can start. (Default 3)
3.3 - 10.0 pps Rate at which the trigger has to be pulled in pulls per second (pps) before ramping can start. (Default 5pps)
3.3 - 10.0 pps Rate at which the trigger has to be pulled in pulls per second (pps) in order to maintain ramping. (Default 5pps)
0.0 - 1.0 s Time in seconds (s) after the last trigger pull during which ramp can be restarted. (Default 0.0s)
Return to Main Menu
10.0 - 30.0 ms Solenoid energise time in milliseconds (ms) for each shot. (Default 26.2ms)
0.0 - 5.0 ms First shot drop-off compensation time in milliseconds (ms). (Default 5.0ms)
00:00 - 04:00 First shot drop-off delay. (Default 00:30)
Return to Main Menu
LEVEL 9 Use trigger De-bounce level 9 (highest level of trigger bounce ltering)
LEVEL 8 - 2 Use trigger De-bounce level 8 - 2. (Default LEVEL 5)
LEVEL 1 Use trigger De-bounce level 1 (lowest level of trigger bounce ltering)
CANCEL Cancel De-bounce selection
1.0 - 20.0 ms Time in milliseconds (ms) that the breech must remain empty before the BBSS looks for a paintball. (Default 4.0ms)
1.0 - 20.0 ms Time in milliseconds (ms) that a paintball must be in the breech for the GEO3.5 to be ready to re. (Default 4.0ms)
3.0 - 25.0 ms Time in milliseconds (ms) that the trigger must be pulled for a shot to be red. (Default 6.0m)
3.0 - 25.0 ms Time in milliseconds (ms) that the trigger must be released before a pull can be recorded. (Default 6.0ms)
51 - 99% Percentage at which the trigger OPTO sensor pull point is set (TRIGGER dependant). (Default 85%)
1 - 49% Percentage at which the trigger OPTO sensor release point is set (TRIGGER dependant). (Default 15%)
Return to Main Menu
TYPE
RAMP SETUP* (re mode dependant)
RATE*
BACK
FILTER
SEMI SHOTS
KICK IN
SUSTAIN
RESTART
DWELL
FSD COMP
FSD DELAY
BACK
DE-BOUNCE
EMPTY
TIMING
FULL
PULL TM
RELEASE TM
PULL PT*
RELEASE PT*
BACK