Manual
42 GEO3.5 MANUAL
THE BREAK BEAM
SENSOR SYSTEM
WARNING!
Always de-gas your marker, discharging any stored gas in a safe direction,
and remove the barrel, loader, air system and any paintballs to make the
marker easier and safer to work on.
Paintball industry standard eye/face/ear and head protection designed
specically to stop paintballs and meeting ASTM standard F1776 (USA)
or CE standard (Europe) must be worn by the user and any person within
range during use, assembly, cleaning and maintenance at all times.
WARNING
Undo the retaining screw for the Break Beam Eye cover on the left hand side of
the GEO3.5 using a 5/64” (2mm) hex key (see gure 15A).
Remove the eye cover to expose the back of the Break Beam Sensor unit
(see gure 15B). Using a dry cotton bud, carefully remove any debris, paint or
moisture from the back of the sensor unit and from inside the eye cover.
Lift the Break Beam Sensor unit free from the GEO3.5 body and using another
dry cotton bud, remove any grease or debris build-up from the front of the sensor
unit (see gure 15C).
FIG 15A
FIG 15B
FIG 15C